Change Modeler Default Values; Display Units - Stratasys Fortus 360mc User Manual

Change Modeler Default Values

Factory presets can be changed from the
1.
From the Main Menu select
2.
Select

Display Units

Select
inches)
• Use the arrow keys to scroll up or down through the available sample
jobs, or to select a job in the sample queue.
• Press the Enter key to build the selected job.
• Additional files can be stored in the sample job queue from the
standard job queue (press 9 to copy a job from the standard job queue
into the sample queue).
• User-added sample job files can be deleted by pressing the DEL key.
Build Job..
Operator Control..
Modeler Status..
>Maintenance..
Modeler Default..
>Modeler Default..
Administration..
Reboot system..
Measure Flatness <E>
. Inches or metric can be selected (factory setting is in
Display Units
> Display Units = in (Inches)
User Placement on Platen:
Modeler Default..
and press ENTER.
Maintenance
|*Tips: Model T16
|* Support T16
and press ENTER.
<E>
No
4-30
menu.