European Standards; Ce Low Voltage Directive Compliance - YASKAWA V1000 Quick Start Manual

8.1 European Standards

8.1 European Standards
Figure 8.1
The CE mark indicates compliance with European safety and environmental regulations and
is required for engaging in business and commerce in Europe.
European standards include the Machinery Directive for machine manufacturers, the Low
Voltage Directive for electronics manufacturers and the EMC guidelines for controlling
noise.
This drive displays the CE mark based on the EMC guidelines and the Low Voltage
Directive.
• EMC Guidelines: Devices used in combination with this drive must also be CE certified
and display the CE mark. When using drives displaying the CE mark in combination with
other devices, it is ultimately the responsibility of the user to ensure compliance with CE
standards. After setting up the device, verify that conditions meet European standards.
• Low Voltage Directive: 73/23/EEC, 93/68/EEC
◆

CE Low Voltage Directive Compliance

This drive has been tested according to European standard EN50178, and it fully complies
with the Low Voltage Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when
combining this drive with other devices:
Area of Use
■
Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3
in accordance with IEC664.
144
Figure 8.1 CE Mark
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide