YASKAWA V1000 Quick Start Manual page 139

No. Name
U1-03 Output Current
U1-04 Control Mode
U1-05 Motor Speed
U1-06 Output Voltage Reference
U1-07 DC Bus Voltage
U1-08 Output Power
U1-09 Torque Reference
U1-10 Input Terminal Status
U1-11 Output Terminal Status
U1-12 Drive Status
U1-13 Terminal A1 Input Voltage
U1-14 Terminal A2 Input Voltage
U1-16 Output Frequency after Soft Start
U1-18 OPE Fault Parameter
U1-19 MEMOBUS/Modbus Error Code
U1-24 Input Pulse Monitor
U1-25 Software No. (Flash)
U1-26 Software No. (ROM)
U2-01 Current Fault
U2-02 Previous Fault
Frequency Reference at Previous
U2-03
Fault
Output Frequency at Previous
U2-04
Fault
U2-05 Output Current at Previous Fault
U2-06 Motor Speed at Previous Fault
U2-07 Output Voltage at Previous Fault
U2-08 DC Bus Voltage at Previous Fault
U2-09 Output Power at Previous Fault
Torque Reference at Previous
U2-10
Fault
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide
Displays the output current.
Refer to V1000 Technical Manual for details.
Displays the motor speed feedback.
Display units are determined by o1-03.
Displays the output voltage.
Displays the DC bus voltage.
Displays the output voltage (this value is determined internally).
Monitor of internal torque reference value for Open Loop Vector
(OLV) control
Displays the input terminal status.
Displays the output terminal status.
Verifies the drive operation status.
Displays the analog input A1 input level.
100% when the input is 10 V.
Displays the analog input A2 input level.
100% when the input is 10 V / 20 mA.
Displays the output frequency.
Displays the parameter number for oPE
where the error occurred.
Refer to V1000 Technical Manual for details.
Displays the Pulse Train input RP frequency.
Yaskawa Flash ID
Yaskawa ROM ID
U2: Fault Trace
Use U2 monitor parameters to view fault trace data.
Display of the current fault.
Display of the previous fault.
Displays the frequency reference at the previous fault.
Displays the output frequency at the previous fault.
Displays the output current at the previous fault.
Displays the motor speed at the previous fault.
Displays the output voltage at the previous fault.
Displays the DC bus voltage at the previous fault.
Displays the output power at the previous fault.
Displays the torque reference at the previous fault.
7.1 Parameter Table
Description
or Err (operator error)
7
139