YASKAWA V1000 Quick Start Manual page 53

Table 4.1 Keys and Displays on the LED Operator
No. Display
1 Data Display Area
2 ESC Key
3 RESET Key
4 RUN Key
RUN
5 Up Arrow Key
6 Down Arrow Key
STOP
7 STOP Key
8 ENTER Key
9 LO/RE Selection Key
10 RUN Light
11 LO/RE Light
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide
4.1 Using the Digital LED Operator
Name
Displays the frequency reference, parameter number, etc.
Returns to the previous menu.
Moves the cursor to the right.
Resets the drive to clear a fault situation.
Starts the drive.
Scrolls up to select parameter numbers, setting values, etc.
Scrolls down to select parameter numbers, setting values, etc.
Stops the drive.
Note: Stop priority circuit. A fast-stop is available by pressing
the STOP key when the drive detects a danger even if the drive
is running by a signal from the multi-function contact input
terminal (REMOTE is set). To avoid stoppage by using the
STOP key, set o2-02 (STOP Key Function Selection) to 0
(Disabled).
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the
next.
Switches drive control between the operator (LOCAL) and the
control circuit terminals (REMOTE).
Note: LOCAL/REMOTE key effective during stop in drive
mode. If the digital operator could change from REMOTE to
LOCAL by incorrect operation, set o2-01 (LOCAL/REMOTE
Key Function Selection) to "0" (disabled) to disable LOCAL/
REMOTE key.
Lit while the drive is operating the motor.
Lit while the operator (LOCAL) is selected to run the drive.
Function
4
53