YASKAWA V1000 Quick Start Manual page 138

7.1 Parameter Table
No.
Motor Direction at Power Up
o2-07
when Using Operator
Accumulated Operation Time
o4-01
Setting
Accumulated Operation Time
o4-02
Selection
Cooling Fan Operation Time
o4-03
Setting
o4-05 Capacitor Maintenance Setting
Inrush Prevention Relay
o4-07
Maintenance Setting
o4-09 IGBT Maintenance Setting
o4-11 U2, U3 Initialize Selection
o4-12 kWh Monitor Initialize Selection
Number of Run commands
o4-13
Initialize selection
T1-00 Motor Selection 1/2
T1-01
Auto-Tuning Mode Selection
T1-02 Motor Rated Power
T1-03 Motor Rated Voltage
T1-04 Motor Rated Current
T1-05 Motor Base Frequency
T1-06 Number of Motor Poles
T1-07 Motor Base Speed
T1-11 Motor Iron Loss
U1-01 Frequency Reference
U1-02 Output Frequency
138
Name
Refer to V1000 Technical Manual for details.
o4: Maintenance Period
Use o4 parameters to perform maintenance.
Sets the starting value for the cumulative operation time of the drive in
units of 10h.
0: Logs power-on time
1: Logs operation time when the drive output is active (output
operation time).
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
0: Saves the fault monitor data
1: Resets the fault monitor data
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
1: 1st Motor - E1 to E2
2: 2nd Motor - E3 to E4 (this selection is not displayed if motor 2 has
not been selected)
0: Rotational Auto-Tuning
2: Stationary Auto-Tuning
3: Rotational Auto-Tuning for V/f control
Sets the motor rated power in kilowatts (kW).
Sets the motor rated voltage in volts (V).
Sets the motor rated current in amperes (A).
Sets the base frequency of the motor in Hertz (Hz).
Sets the number of motor poles.
Sets the base speed of the motor in revolutions per minute r/min
(RPM).
Provides the iron loss for determining the Energy Saving coefficient.
U1: Operation Status Monitors
Use U1 monitors to display the operation status of the drive.
Monitors the frequency
Displays the output voltage.
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide
Description