Parameter Table - YASKAWA V1000 Quick Start Manual

7.1 Parameter Table

7.1 Parameter Table
No. Name
Use A1 parameters to configure the basic environment for drive operation.
A1-01 Access Level Selection
A1-02 Control Method Selection
A1-03 Initialize Parameters
A1-04 Password 1
A1-05 Password 2
A1-06 Application Preset
A1-07 DriveWorksEZ Function Selection
A2-01
to User Parameters, 1 to 32
A2-32
A2-33 User Parameter Automatic Selection Refer to V1000 Technical Manual for details.
b1-01 Frequency Reference Selection 1
b1-02 Run Command Selection 1
b1-04 Reverse Operation Selection
b1-07 Local/Remote Run Selection
114
A1: Initialization Parameters
0: Operation only
1: User Parameters (access to parameters selected by the user)
2: Advanced Access Level
0: V/f Control without PG
2: Open Loop Vector (OLV)
5: PM Open Loop Vector (PM)
Note: Does not return to the default setting after initialization.
0: No Initialize
1110: User Initialize (First set user parameter values must be stored
using parameter o2-03)
2220: 2-Wire Initialization
3330: 3-Wire Initialization
5550: OPE04 Error Reset
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
A2: User Parameters
Use A2 parameters to program the drive.
Refer to V1000 Technical Manual for details.
b1: Operation Mode Selection
Use b1 parameters to configure the operation mode.
0: Operator - Digital preset speed d1-01 to d1-17.
1: Terminals - Analog input terminal A1 or A2.
2: Memobus communications
3: Option PCB
4: Pulse Input (Terminal RP)
0: Operator - RUN and STOP keys on the digital operator.
1: Digital input terminals S1 to S7
2: Memobus communications
3: Option PCB.
0: Reverse enabled.
1: Reverse disabled.
Refer to V1000 Technical Manual for details.
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide
Description