YASKAWA V1000 Quick Start Manual page 117

No. Name
b5-18 PID Setpoint Selection
b5-19 PID Setpoint Value
b5-20 PID Setpoint Scaling
b5-34 PID Output Lower Limit
b5-35 PID Input Limit
b5-36 PID Feedback High Detection Level Refer to V1000 Technical Manual for details.
PID Feedback High Level Detection
b5-37
Time
b5-38 PID Setpoint / User Display
b5-39 PID Setpoint Display Digits
b6-01 Dwell Reference at Start
b6-02 Dwell Time at Start
b6-03 Dwell Frequency at Stop
b6-04 Dwell Time at Stop
Use b8 parameters to configure the energy saving/conservation drive function.
b8-01 Energy Saving Control Selection
b8-02 Energy Saving Gain
Energy Saving Control Filter Time
b8-03
Constant
b8-04 Energy Saving Coefficient Value
b8-05 Power Detection Filter Time
b8-06 Search Operation Voltage Limit
Use C1 parameters to configure motor acceleration and deceleration.
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
C1-03 Acceleration Time 2
C1-04 Deceleration Time 2
Acceleration Time 3 (Motor 2 Accel
C1-05
Time 1)
YASKAWA ELECTRIC TOEP C710606 14A YASKAWA AC Drive - V1000 Quick Start Guide
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
b6: Dwell Function
Use b6 parameters to configure dwell function operation.
Refer to V1000 Technical Manual for details.
b8: Energy Saving
0: Disabled
1: Enabled (set b8-04)
Refer to V1000 Technical Manual for details.
Refer to V1000 Technical Manual for details.
Sets the Energy Saving coefficient and is used to fine adjustments in
V/f Control.
Sets a filter time for the Power Detection used by Energy Savings in
V/f Control.
Sets the limit for the voltage search operation performed by Energy
Savings in V/f Control.
C1: Acceleration and Deceleration Times
Sets the time to accelerate from 0 to maximum frequency.
Sets the time to decelerate from maximum frequency to 0.
Sets the time to accelerate from 0 to maximum frequency when
Accel/Decel times 2 are selected by a digital input.
Sets the time to decelerate from maximum frequency to 0 when
Accel/Decel times 2 are selected by a digital input.
Sets the time to accelerate from 0 to maximum frequency when
Accel/Decel times 3 are selected by a digital input.
7.1 Parameter Table
Description
7
117