Description Of Keypad Icons - Thermo Scientific Orion 2117HL User Manual

Analyzer Operation
Description of
Keypad Icons
Keypad Icons
Key Parameter/Mode
Enters calibration mode
Scrolls up digit numbers
Scrolls up through a list of
options in setup and cal modes
Enters setup mode
Moves to the next digit
Enters test mode
Scroll down digit numbers
Scroll down through a list of
options in setup and cal modes
Enters log view mode
+/- function
Enter function
Enter function (in test mode only)
Exit to measure function
Last screen function
Decimal point function
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
Figure III-2
Action
Calibration mode with operator prompts
Use to edit numeric values
Use to select available options
System setup mode at the last parameter used
by the operator
Use to edit values
Use to advance through sequence of displays
DIAGNOSTICS will appear in top right of screen
Use to edit numeric values
Use to select available options
Use to view data in calibration, measure and
status logs
Enters negative/positive sign when editing numbers
Use to accept value or selection displayed on screen
and store value or selection in memory
Use in test mode to display additional information
for selected menus
Use to exit setup or cal modes and enter the
measure mode
Use in setup and test modes to return to the
previous screen or menu
Use to set the decimal point position in certain
menus with numbers that require a decimal point
t Ch 1
t Ch 2
Ch 2 status
Ch 1 status
Operational Selections
Depends on type of board installed
0 through 9 selectable by digit, first digit sometimes
selectable 0 through 19
PASS, DATE, TIME, LOG, RSET, DISP, CH1, CH2, MDL,
MEAS, HOLD, TCMP, TADJ, ALRM, mAMP, mADJ, TEST,
CAL, PH, COND, DKA
When moved to final digit, the system will wrap around
to first digit
0 through 9 selectable by digit, first digit sometimes
selectable 0 through 19
Analyzer automatically enters measure mode when first
turned on and after calibration
III-2