Thermo Scientific Orion 2117HL User Manual page 44

Analyzer Operation
Note: The following menu options are for analyzers with two boards installed only. If two channels are used, select
the channel number in the main setup mode (CH1 or CH2) and additional menu options will be displayed.
Default Operator Action
CH1
Press
the setup mode
Press
menu options
Press
customize the parameter (refer to the menu option
displays that are shown on the following pages for
detailed instructions)
Press
Default Operator Action
CH2
Press
the setup mode
Press
menu options
Press
customize the parameter (when a pH/ORP or
conductivity board is installed on channel 2, refer
to the Thermo Scientific Orion 2100 Series pH/ORP
Analyzer and Conductivity Analyzer User Guide for
detailed instructions on the menu option displays)
Press
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
to set the channel 1 specific menus in
to loop through the channel specific
to select a menu option and
to scroll to the next menu
to set the channel 2 specific menus in
to loop through the channel specific
to select a menu option and
to scroll to the next menu
Scrolling Marquee
CH1
(flashing)
MEAS
(flashing)
CH1
(flashing)
Scrolling Marquee
CH2
(flashing)
MDL
(flashing)
CH2
(flashing)
Main Display Notes
CH1 will not be
SEL
shown in scrolling
marquee if only one
SCrn
board is installed
SEL
CH1
SEL
SCrn
Main Display Notes
CH2 will not be
SEL
shown in scrolling
marquee if only one
SCrn
board is installed
SEL
CH2
SEL
SCrn
III-18