Analyzer Operation
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
RSET
Reset the analyzer to factory defaults for setup parameters:
•
Use to troubleshoot the system (a hard reset can be performed if the
keypad and software are not responding, refer to Chapter VI, Resetting
the Analyzer)
Warning: Resetting the analyzer will lose all stored information including
relay, logs and calibration settings.
DISP
Set the automatic lighting options for the backlit display:
•
AUtO – Brightness will change in response to ambient light source
•
On – Backlit display is always on
•
OFF – Backlit display is always off
•
Default display – AUtO
III-6