Thermo Scientific Orion 2117HL User Manual page 50

Analyzer Operation
Default Operator Action
ALRM (cont'd)
1 ppm Set the HI or LO value for rLY1:
Press
Press
Press
Press
the remaining digits and press
move through the remaining digits
Press
advance to the next screen
OFF
Press
CAL, HOLd and Err
Press
return to the main setup mode
Press
specific menu options in the setup mode
Press
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
to move the decimal point
/ to set the first digit
to move to the next digit
/ to set the values of
to
to accept the setting and
/ to scroll through OFF,
to accept the setting and
to return to the channel
to scroll to the next menu
Scrolling Marquee
ENTER VALUE
SELECT CALIBRATION HOLD
ERROR OR OFF
SELECT CALIBRATION HOLD
ERROR OR OFF
CH1 or CH2
(flashing)
ALRM
(flashing)
Main Display
rLY2
# # . # #
(change flashing digit)
rLY3
OFF
(flashing)
rLY3
OFF, CAL, HOLd or Err
(flashing)
SEL
SCrn
SEL
SCrn
Notes
Displayed if HI or
LO was selected
for rLY2 in
previous screen
Action required
if HI or LO was
selected for rLY2
in previous screen
Displayed for two
channel analyzer
Action required
for two channel
analyzer
SEL CH1 or SEL
CH2 on main
display of two
channel analyzer
III-24