Pull Content - ATEN RCMDVI00BT User Manual

Pull Content

Pull Content allows you to pull a receiver's computer connection to the local
receiver's console, allowing both to access to the computer. Click the Pull
Content tab and the following screen appears:
The Pull Content Page components are described in the table, below:
No. Item
1 Receiver Name
2 Channel Status
3 Connect
5 Next Arrow
6 Previous Arrow
9 Logout
10 Go to Configuration
Window
Description
Lists the receiver names currently connected to the
channel listed under Channel Status.
Lists the name, description and access type of each
available channel connection.
Click Pull Content and the receiver will pull the
channel connection to the local console using the
access mode displayed under Channel Status.
Use these two buttons to navigate to the next page
or to the end of the list if there are more choices
available than can be seen on the page.
Use these two buttons to navigate to the previous
page or to the beginning of the list if there are more
choices available than can be seen on the page.
Click this button to log out of the Connection Page.
Click this button to return to the main OSD screen.
Chapter 4. OSD Operation
81