Table of Contents
Advertisement
RCM KVM over IP Transmitter User Manual
Transmitter Group
Creating a Transmitter Group allows you to create a connection that sources
the video from multiple transmitters to be viewed across multiple receiver
displays. To use this feature, connect a Transmitter Group to a Receiver
Group (page 135). Transmitter Groups appear at the bottom of the Transmitter
settings page.
To create a Transmitter Group, in Transmitter settings, click
select Create Group TX.
Fill in the appropriate information and then double-click or drag-and-drop
transmitters to add or remove them in the top panel. The transmitters in the top
panel will be used as the video source for the Receiver Group at the receiver.
Item
Name
Description
Location
From the same PC video
output
Save
Cancel
126
Enter a name for the Transmitter Group.
Enter a description for the Transmitter Group.
Use the drop-down menu to select a location for the
Transmitter Group or leave as All Devices. See Location,
page 110, for details.
Enable to indicate that all of the video outputs in this
Transmitter Group are from the same multi-screen PC.
Click Save to save the changes.
Click Cancel to exit without saving.
Description
and then
Advertisement
Table of Contents
