RCM KVM over IP Transmitter User Manual
Transmitter Configuration
When the KVM over IP Matrix Manager discovers transmitters on the network,
they appear on the Transmitter settings page. Double-click a transmitter to
configure its settings.
Item
Basic
112
Device Name: Enter a name for the Transmitter.
Description: Enter a description for the Transmitter.
Location: Use the drop-down menu to select a Location for the
device. Locations filter the transmitters seen on the settings page.
Mode: Use the radio button to select how the Transmitter will be
installed and managed:
Select Extender mode for simple one-to-one (transmitter to
receiver) setups that are managed at the receiver's OSD menu.
Select Matrix mode to manage devices and connections over
the LAN from the KVM over IP Matrix Manager. This mode is for
advanced administration of transmitter and receiver connections
configured within the CCKM.
Enable Media: Select which source type the Transmitter can
stream: Video, Audio, USB and RS-232.
Description