ATEN RCMDVI00BT User Manual page 148

RCM KVM over IP Transmitter User Manual
Item
Basic
RS232 Settings
Extender
Properties
132
Device Name: Enter a name for the receiver.
Description: Enter a description for the receiver.
Location: Use the drop-down menu to select a Location for the
device. Locations help organize how you view receivers on the
settings page.
Mode: Use the radio button to select how the receivers will be
installed and managed:

Select Extender mode for simple one-to-one (transmitter to
receiver) setups that are managed with the receiver's OSD
menu.

Select Matrix mode to manage devices and connections over
the LAN from the KVM over IP Matrix Manager. This mode is for
advanced administration of transmitter and receiver connections
configured within the KVM over IP Matrix Manager Web GUI.
Enable Media: Select which source type the receiver can stream:
Video, Audio, USB and RS-232.
Audio Output: Use this option to independently stream the desired
audio signals to digital or analog audio output devices (speakers)
connected to the receiver.
CCKM IP: Set the IP address and Port number of the computer
running the KVM over IP Matrix Manager. The default port number
is 9110.
IP Installer: The IP Installer is an external Windows-based utility
for assigning an IP address to the device. Click a radio button to
select Enable, Disable or View Only for the IP Installer utility.
See IP Installer, page 263 for instructions.
Configure the serial device settings for the receiver. The default
settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
If you selected Extender mode (above) set the RCM transmitter's
IP address as the source of video, audio, USB, and RS-232 source
signals, to be sent to the receiver.
If you selected Matrix mode (under Basic) the Properties will be
grayed out. Use Transmitters, Virtual Transmitters, and Transmitter
Groups to configure the connections (see Transmitter, page 110).
Description