Table of Contents
Advertisement
The KVM over IP Matrix Manager Main Page
After you have successfully logged in, the web browser's main page appears:
4
5
Web Components
The web components are described in the table below:
No.
Item
1
Install Wizard
2
System Settings
3
Logout
4
Interactive Display Panel This is your main work area. Scroll the page up or
5
Instant Link
Chapter 6. Browser / Telnet Operation
Description
This icon helps you locate transmitters / receivers on
the LAN to add them to the KVM over IP Matrix
Manager (see Installation Wizard, page 97). If a
device can't be found, check the Network settings in
the device's OSD menu (see page 59 & 63).
Click this icon to enter the System Setting section
where you can configure the KVM over IP Matrix
Manager. The Settings are discussed on page 155.
Click this button to log out of your KVM over IP
Matrix Manager web session.
down to view the various selections. Some items can
be clicked to open a settings page, while others
provide status information.
Clicking this icon opens the lower bar which allows
you to instantly connect RCM/KE devices. Instant
Link is discussed on page 100.
1
2
3
95
Advertisement
Table of Contents
