ATEN RCMDVI00BT User Manual page 172

RCM KVM over IP Transmitter User Manual
Heading
Basic RCM/KE Manager
Version
Serial Number
RCM/KE Manager
Name
Description
Language
Beeper
CCKM Timeout
Authentication Lock
Boundless Switching
Focus
Push / Pull Login
Check
156
Item
This provides the version of the RCM/KE Manager
software.
This provides the serial number and a link to
upgrade the software.
Enter a name for the RCM/KE Manager.
Enter a description for the RCM/KE Manager.
Select the language for the RCM/KE Manager.
Choices are: English, Chinese (Traditional),
Simplified Chinese, Japanese, German, Korean,
Russian, French, Spanish, and Portuguese.
Select Enable to sound a beep from the
transmitter / receiver every time a configuration
change is made.
If there is no user input for the amount of time
entered in the box, a user logged into the CCKM
is automatically logged out. Check Disable to turn
this function off.
When accidental power cut happens, the function
allows the user to retain his/her settings as was
shown before the power cut. The user keeps the
same authentication and display.

Uncheck Disable to turn this function on.

Specify a time (in seconds) you wish to keep
the authentication and display for.
When disabled or, if enabled, after the time
specified above, the manager will prompt you to
authenticate when you wish to access the KE
Manager.
When using Boundless Switching(see Boundless
Switching, page 135) across multiple receivers
within a receiver group or video wall, a colored
border is shown on the receiver display currently
being accessed (focus receiver).

Uncheck Always to only display the colored
border for a set time interval immediately after
switching the focus receiver.

Specify a time (in seconds) you wish to display
the colored border for upon switching the focus
receiver.
Enable to check the access rights of the users
receiving transmitter sessions upon push / pull.
Description