Receiver Permissions - ATEN RCMDVI00BT User Manual

Item
Save
Cancel

Receiver Permissions

Receiver Permissions sets which users and groups can access a receiver. Select
a device under the Receiver List, and then click under Operation to grant a user
or group permission to access the device. This will allow the user to log into
the receiver's OSD menu to access the Connections tab.
To set Receiver Permissions, in Receiver settings, click
Item
Receiver List
Drop-Down Menu
Use the RX OSD button to enable/disable showing the
receiver's name and IP address in the top left corner of the
connected display. This helps identify which receiver is
connected to the display.
Click Save to save the changes.
Click Cancel to exit without saving.
Lists the receivers which can be selected to set
permissions.
Use the drop-down menu to select User or Group. After
making a selection, the list of users or groups appears.
Set permissions by selecting the Operation box next to
each user or group.
Chapter 7. System Status
Description
.
Description
139