ATEN RCMDVI00BT User Manual page 23

 Disconnection Alert — Pop-up warning message and looping alarm
beeping to notify users of disconnection status
 RCM API support through dedicated remote port: for system integration
and automation
 Boundless Switching — simply moves the mouse cursor across screen
boundaries to switch between different receivers (Rx)
 Supports recording of remotely-accessed computer operations using
CCVSR
 RFID login without typing username and password
 "Push" and "Pull" — shares content instantly to / from a single Rx or
video wall by just one click
Note: 1. The KVM over IP Access Control Box (2XRT-0015G) is sold
separately. Contact your ATEN dealer for product information.
2. The CV10KM USB to PS/2 Converter is sold separately. Contact
your ATEN dealer for product information.
3. These exclusive RCM functionalities are only available on
RCMDVI00BT / RCMDVI40BT / RCMDVI50T.
4. Please refer to the Compatible Products section on the product web
page for the various compatible accessories.
5. SFP modules are required for fiber network connection. The SFP
module (2A-136G / 2A-137G) is sold separately. Contact your ATEN
dealer for product information.
6. To convert a DVI to VGA signal, a DVI-I to VGA converter is
required.
7. Some of the RCMDVI00AT / RCMDVI40AT / RCMDVI00BT /
RCMDVI40BT / RCMDVI50T's features may not be supported,
depending on the functionality of the cascaded KVM switch. (For
example, some switches do not support virtual media.)
8. This functionality is only available on RCMDVI00BT /
RCMDVI40BT / RCMDVI50T.
9. Advanced functions are supported when the RCM transmitters are
managed by KVM over IP Matrix Manager (CCKM).
10.This functionality is only available on RCMDVI00BT /
RCMDVI40BT / RCMDVI50T and compatible with RFID Reader
(Soyal AR-725-U) only.
Chapter 1. Introduction
10
7