Table of Contents
Advertisement
Item
Replace Device
Click Replace Device in the top left corner to replace an old
transmitter with a new one.* All settings are copied from the old
transmitter to the new transmitter. Before using this feature,
connect the new transmitter to the network. After clicking Replace
Device, use the drop-down menu to select the new transmitter
where the settings will be applied.
Note:
Save
Click Save to save changes to the properties.
Cancel
Click Cancel to exit without saving.
1. This option only appears when a transmitter is offline.
2. This feature can be used for both receivers and
transmitters. Replacement should be carried out on a
similar model.
Chapter 7. System Status
Description
115
Advertisement
Table of Contents
