Rcmdvi50T Rear View - ATEN RCMDVI00BT User Manual

RCM KVM over IP Transmitter User Manual

RCMDVI50T Rear View

1 2
7
No. Component
1 grounding terminal
2 audio ports
3 USB Type-A port
4 RS-232 port
5 USB ports (console)
6 DO / relay
7 power jacks
8 reset button
24
3
4 5
9 10
8 12
11
The wire used to ground the unit connects here.
These mini stereo ports can connect to speakers
(green) and a microphone (pink).
Connects to USB peripherals.
This RS-232 serial port is for connecting to a serial
terminal.
The unit's USB keyboard and USB mouse plug into
these ports.
Connects to electric door lock or alarm.
The cable from the DC power adapter connects here.
Connect both power jacks to a power source for power
redundancy.
This reset button must be pushed with a thin object,
such as the end of a paper clip.

Press and release to reboot the device.

Power off, hold reset then power on the device
while pressing reset to recover from a firmware
upgrade failure.

Press and hold it in for more than three seconds
resets the unit back to its factory default
settings*.
Note: The Reset to Factory Default function resets everything
but the login information (username/password) to the factory
default settings. To reset the login information, refer to Reset
All Information on page 266.
6
13
Description