Table of Contents
Advertisement
Installation Wizard
Use the Install Wizard to add transmitters and receivers to the CCKM. The
wizard locates devices on the network and walks you through adding them. To
add devices, do the following:
1. Connect all transmitters and receivers to the LAN.
2. On the CCKM main page, click the Install Wizard icon (page 95).
3. When the installation wizard appears, select options to locate devices:
Item
Search Local
Search Subnet
Transmitter / Receiver
4. Check the boxes under Transmitter / Receiver to select the devices you
want to add, then click Next.
5. Under Assign IP Address, select an option to configure the network
settings, then click Next.
Chapter 6. Browser / Telnet Operation
Check this box and click the Refresh button to search the
local area network for transmitters / receivers.
Check this box, enter a subnet IP and then click the
Refresh button to search the subnet for transmitters /
receivers.
Displays the number of transmitters and receivers that
have been discovered on the network. Use the check
boxes next to the transmitters / receivers to select the
devices you want to add.
The Refresh button provides a way to update the
information currently being displayed in the install wizard
window.
Description
97
Advertisement
Table of Contents
