Table of Contents
Advertisement
Starting Up
For the first time running the AP, right-click the Windows/Java Client AP and
click "Run as administrator" to start.
The Client Connection Screen is shown below and each components are
described in the table. Windows Client will be the example shown here.
Item
Server List
Server
Connect
Disconnect
Switch to remote view
Message panel
1. Double-click the unit. When the unit
When you run the Client program, it automatically searches
the user's local LAN segment for the transmitters (via remote
port access), and lists whichever ones it finds in this box. If
you want to connect to one of these units, double-click to
connect.
If the transmitters you wish to connect to is at a remote
location, it will not be found on your LAN. You can enter its IP
address and port yourself.
If you don't know the Port number, contact the Administrator.
When the IP address and Port number for the unit you wish to
connect to have been specified, click Connect to start the
connection.
Starts connecting to the transmitters.
These buttons become active once you log into the
transmitters.
The blank field on the right of the Server section shows the
current status of the server connection.
is
Chapter 12. Remote Viewer
Description
connected, a login window appears:
191
Advertisement
Table of Contents
