Telnet - ATEN RCMDVI00BT User Manual

RCM KVM over IP Transmitter User Manual
RS-232 / Telnet
The RCM/KE series can be operated and configured via a remote terminal
session using Telnet. This is a useful means for configuring devices for first-
time setup and connection to the network.

Telnet

To log into the RCM/KE series device by means of a Telnet session, do the
following:
1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the RCM/KE device's IP address with port 23 in the
following way:
telnet [IP address] [port]
3. Please press [T/t] to start "TextMenu" The login screen appears. At the
login prompt, provide the Password.
Note: The default password for Telnet sessions is password.
102