Table of Contents
Advertisement
Overview
This chapter provides instructions to configure and operate KE Series devices
using the local On Screen Display (OSD). To configure the network settings
with the OSD, see Network Configuration, page 46.
Invoking the OSD
The On Screen Display (OSD) is a keyboard/mouse-driven application on a KE
receiver used to configure its and the RCM transmitter's settings. Once the
receiver has discovered the transmitter over a network* or Ethernet cable
connection, you can use the OSD on the receiver to configure the transmitter.
To invoke the OSD, press the OSD pushbutton on the front of the receiver, or
tap the [Scroll Lock] key on the keyboard twice. The OSD main appears.
To exit the OSD, press [Esc] on the keyboard, click Logout; tap the [Scroll
Lock] key twice, or return to the OSD main page and press the OSD
pushbutton on the front of the receiver. The OSD disappears and the computer
desktop screen or the System Login prompt is displayed.
Note: 1. For the receiver to discover the transmitter over a network, both must
be on the same subnet of the LAN.
2. To change the OSD hotkeys, see page 72.
3. If the keyboard/mouse doesn't work when the OSD is invoked, see
USB Mode, page 133.
Touch Screen Calibration
If you're using a touch screen monitor and the OSD appears off center, you can
+
use the blinking
at the corners to adjust the position of the OSD.
Chapter 4
OSD Operation
55
Advertisement
Table of Contents
