Osd Command - ATEN RCMDVI00BT User Manual

OSD Command

To enable or disable the On-Screen Display (OSD) menu for a receiver, use the
following command:
Command + Output + Number + Control + [Enter]
1. For example, to enable the OSD for receiver 192.168.0.51, type:
osd o192.168.0.51 on [Enter]
2. For example, to disable the OSD for the local receiver, type:
osd off [Enter]
The following tables show the possible values for the OSD command:
Command
Output
Number
Control
The following table lists the available OSD commands:
Comman
Output
d
osd o
osd
o
Note: 1. Each command string can be separated with a space.
2. Skip the Output and Number command strings to configure the local
receiver.
osd OSD command
o Output command
xx Output number
xx: receiver ID or IP address
on Enable OSD functions
off Disable OSD functions (default)
Number Control
xx on
off
xx
Chapter 14. CLI Commands
Description
Description
Description
Description
Enter Description
[Enter] Enable OSD functions for
output xx
xx: receiver ID or IP address
[Enter] Disable OSD functions for
output xx off (default)
xx: receiver ID or IP address
231