Keys To Network Performance; Build A Network Diagram; Other Factors - ATEN RCMDVI00BT User Manual

Appendix

Keys to Network Performance

For optimum performance, KE Series devices requires high amounts of data to
be transferred across a network; therefore we recommend the following
strategies to setup KE Series devices. Using our suggestions will provide better
performance and the highest video resolutions possible. Use each of the keys
to ensure the best transmission of data and the highest throughput possible.

Build a Network Diagram

To build an effective RCM/KE installation, start by mapping out the layout.
Create a diagram with the RCM/KE devices, computers and routers along with
how they will be connected across the network. It also helps to write out how
the devices will interact. Use this diagram as the frame work as you decide
what devices to purchase and how to build the network effectively for the best
data throughput.
Considerations:
 If possible, create a private network for the RCM/KE devices
 Use the same switch model throughout
 Use a flat cascaded layout
 Avoid a tree or pyramid structure
 Limit cascades to two levels
 Install network switches near each other
 Minimize the distance of connections
 Install KVM over IP Matrix Manager (CCKM) computer and RCM/KE
devices on the same subnet
 Check the 3 Other Factors before installation

Other Factors

 Choose the Right Cable
Always use Cat 5/6e Ethernet cable or higher installed by a professional
between any two devices you are installing. We recommend using ATEN
Brand Ethernet cable to ensure the quality. It's best when installing RCM/KE
devices to use brand new Ethernet cabling for each part of the installation to
ensure the reliability of the data being transmitted. This is a key to getting the
best uninterrupted video resolution across the network.
271