System
The System tab allows you to configure the transmitter's general settings:
Item
Device
Information
Reboot
Transmitter
Password
Change
After entering the information, click Save.
Enter the Name and Description of the transmitter. It also
displays the IP Address, MAC Address, F/W version, and Serial
Number of the Transmitter.
Check the box and click Reboot to reset the transmitter's
settings back to the factory default. All custom settings (except
for login account settings) will be lost.
Check Enable to require a password for access to the
transmitter's OSD configuration screen. Enter the Old
Password, enter a New Password, and confirm the new
password in the Confirm Password box.
Chapter 4. OSD Operation
Description
67