Table of Contents
Advertisement
RCM KVM over IP Transmitter User Manual
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the
procedure was successful:
Firmware Upgrade Recovery
If the Upgrade Succeeded screen doesn't appear or the upgrade procedure is
abnormally halted (due to computer crash, power failure, etc.), the device may
become inoperable. If you find that the device does not work following a failed
or interrupted upgrade, do the following
1. Power off the RCM/KE device.
2. Press the Reset button, then power on the RCM/KE device while holding
Reset.
3. Hold Reset for 7 seconds after the device is powered on.
4. The device will revert to a previous firmware version and recover from the
failure.
5. Upgrade the firmware to the most current version available.
214
Advertisement
Table of Contents
