Table of Contents
Advertisement
RCM KVM over IP Transmitter User Manual
Video Wall
Creating a Video Wall allows you to create connections that combine receiver
displays to form a large video wall. Use the options to group multiple receivers
in the video wall. A video wall can contain multiple forms of single displays
and grouped displays in various layouts. Video Walls are listed below
Receivers, on the Receivers settings page.
To create a Video Wall, in Receiver settings, click
Video Wall.
Select the number of displays and then group multiple displays to form large
screens and/or use single displays for independent screens to create the video
wall's layout. Click the bar -- under the display icon to select a receiver for each
display. This configuration should match the actual video wall layout.
Item
Name
Description
Number of Displays
136
Enter a name for the Video Wall.
Enter a description for the Video Wall.
Use the Horizontal and Vertical drop-down menus to select
the number of displays that make up the video wall (a
maximum of 64 are supported). Match this to the physical
layout of the displays. Click the refresh icon to update the
layout.
and then select Create
Description
Advertisement
Table of Contents
