Table of Contents
Advertisement
RCM KVM over IP Transmitter User Manual
Set Command
The Set command allows you to configure the properties of a device. Some
settings require that both the device and Matrix Manager are online or the
command will fail.
The formula for the Set command is as follows:
Command + Output + Input + Number + Control + Value + [Enter]
1. For example, to set the name of the local receiver to RCMDVI00ATX1,
type the following:
set Name=RCMDVI00ATX1 [Enter]
2. For example, to set the description of transmitter (192.168.0.33) to RCM
Room B, type the following:
set o192.168.0.19 Description=RCM Room B [Enter]
3. For example, to set the DHCP settings of transmitter (192.168.0.28) to
static, type the following:
set i192.168.0.28 dhcpFlag=STATIC [Enter]
4. For example, to set the IP settings of the local receiver to 192.168.0.2, type
the following:
set ipAddr=192.168.0.2 [Enter]
5. For example, to set the transmitter video IP setting to 192.168.0.44 for
receiver (192.168.0.56), type the following:
set o192.168.0.56 TxVideoIP=192.168.0.44 [Enter]
The following tables show the possible values for the Set command
Command
Output
Number
238
set
Set command
o
Output command
Input
i
Input command
xx
Output or Input number
xx: Device ID or IP address
Description
Description
Description
Description
:
Advertisement
Table of Contents
