Profile Command - ATEN RCMDVI00BT User Manual

Profile Command

The Profile command allows you to connect profiles and video walls.
The formula for Profile commands is as follows:
Command + Profile + Num1 + Control + [Enter]
1. For example, to connect profile 8 and lock the OSD menu, type the
following:
profile f8 [Enter]
2. For example, to connect profile 4 with access to the OSD menu, type the
following:
profile f4 release [Enter]
3. For example, to disconnect profile 12 and return to the receiver to the OSD
menu, type the following:
profile f12 back [Enter]
The following tables show the possible values for the Profile commands:
Command
profile Profile command
Profile
f Profile ID
Num1
xx Profile or Video Wall ID
xx: 1-99
Control
lock Connect profile, lock access to
OSD menu (default)
release Connect profile, allow access to
OSD menu
back Disconnect profile, return
receiver to OSD menu
Chapter 14. CLI Commands
Description
Description
Description
Description
223