Installing The Kvm Over Ip Matrix Manager - ATEN RCMDVI00BT User Manual

Installing the KVM over IP Matrix Manager

The following are instructions to install the KVM over IP Matrix Manager on
a primary or secondary computer. For software requirements, see Minimum
Hardware/Software Requirements, page 10.
1. Insert the USB license key into a USB port on your computer.
Note: If you have more than 8 KE Series devices in your setup, a USB
license key is required to install the KVM over IP Matrix Manager.
2. Double-click the KEMatrixManagerSetup file to start the setup. When the
Introduction screen appears, click Next.
3. The License Agreement appears:
Chapter 5. Software Installation
85