ATEN RCMDVI00BT User Manual page 15

Chapter 6, Browser / Telnet Operation, explains how to log in to the
KVM over IP Matrix Manager with a web browser, and describes the features,
functions, and how to work with the browser's main interface.
Chapter 7, System Status, explains how to use the KVM over IP Matrix
Manager's System Status panel to manage Transmitters, Receivers, Users,
Profiles and Logs.
Chapter 8, System Settings, explains the KVM over IP Matrix Manager's
system settings, which include the General, ANMS, LDAP/AD, RADIUS,
TACACS+ authentication, F/W Upgrade, Redundancy, Backup/Restore,
Certificates, and Sessions tabs.
Chapter 9, Connections, describes how to use the KVM over IP Matrix
Manager 's Connections panel to view and disconnect Transmitter and
Receiver connections.
Chapter 10, Scheduled Profile, describes how to use the KVM over IP
Matrix Manager's Scheduled Profile panel to view active profile schedules.
Chapter 11, Sessions, describes how to use the KVM over IP Matrix
Manager's Sessions panel to view and disconnect user sessions.
Chapter 12, Remote Viewer, describes how to use the Remote Viewer to
view and control video sources connected to AiT transmitters.
Chapter 13, Firmware Upgrade Utility, explains how to download and
use the Firmware Upgrade Utility to install new firmware on the devices.
Chapter 14, CLI Commands, provides a complete list of the serial
protocol and TCP/IP commands used when utilizing the RS-232 Serial Port or
a network connection to configure the KE devices.
Appendix, at the end of the manual provides technical and troubleshooting
information.
Note:
 Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit or connected
devices.
 The product may be updated, with features and functions added, improved
or removed since the release of this manual. For an up-to-date user
manual, visit http://www.aten.com/global/en/
RCM KVM over IP Transmitter User Manual
xv