No.
Item
5
Next Arrow
6
Previous Arrow
7
Logout
8
Go to Configuration
Window
Push Content
Push Content allows you to push the receiver's channel connection to another
receiver's console, allowing both to access the computer. Select the Push
Content tab and the following screen appears:
The Push Content Page components are described in the table, below:
No.
Item
1
Receiver Name
Use these two buttons to navigate to the next page or to
the end of the list if there are more Profiles available than
can be seen on the page.
Use these two buttons to navigate to the previous page or
to the beginning of the list if there are more Profiles
available than can be seen on the page.
Click this button to log out of the Connection Page.
Click this button to return to the main OSD screen.
Lists the receivers that can be selected to push the
local receiver's channel connection to.
Chapter 4. OSD Operation
Description
Description
79