Table of Contents
Advertisement
Item
Bezel Dimension
Lock / Unlock
Layout Selection
Location
Group Login
Use the two boxes to increase/decrease the frame size of
each active display.
Click the monitor to Lock the (2) bezel settings, so that
when one size is changed they all change.
Click the monitor to Unlock the (2) bezel settings, so that
each size can be set independently.
Click + or
X
to add or remove additional layouts to the Video
Wall. The options listed here will appear in a drop-down
menu for the Video Wall, allowing you to quickly choose
different layouts from the Receiver settings page. Arrows
below the Layout Selection box allow you to move up or
down in the list.
Three layout templates are available for quick setup. The
Videowall and Splitter options can not be changed but allow
you to select the receivers. These three layouts can not be
deleted.
Video Wall provides a basic full screen layout where one
transmitter connects to multiple receivers to display the
video together as one full screen.
Splitter provides a layout that connects a transmitter to
multiple receivers that show the same video displayed on
separate screens independently.
Customized provides a basic full screen layout that can
be configured into groups (see Group below) as
desired.*When using the RCMDVI40AT / RCMDVI40BT
in Customized layouts, only the its first video port will
display video, because each port's video source is
independent. When using the RCMDVI40AT /
RCMDVI40BT in Video Wall or Splitter layouts, both
video ports will display video. Video wall only supports
Share, View Only and Occupy access modes.
Use the drop-down menu to select a location for the Video
Wall or leave it as All Devices. See Location, page 110, for
details.
When enabled, users logging into or out of 1 receiver
automatically logs into or out of all other receivers within the
Video Wall, using the same set of credentials.
Chapter 7. System Status
Description
137
Advertisement
Table of Contents
