Table of Contents
Advertisement
3. Key in the email address of where the report is being sent from in the
From field.
Note: 1. Only one email address is allowed in the From field, and it
cannot exceed 64 Bytes.
2. 1 Byte = 1 English alphanumeric character.
4. Key in the email address (addresses) of where you want the SMTP
reports sent to in the To field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.
5. Click Save.
1. Once set, an SMTP report will be sent to the recipients for every
100 logs accumulated or once every 30 minutes.
2. An immediate SMTP report will also be sent whenever an error
log occurs.
Syslog Settings
To record all the events that take place on the RCM/KE Manager and write
them to a Syslog server, do the following:
1. Check Enable.
2. Use the drop-down menu to select the Log Level (Information,
Warning, or Error).
3. Key in the Server IP address of the Syslog server.
4. Key in the Service Port number. The valid port range is 1-65535.
5. Click Save.
Chapter 8. System Settings
163
Advertisement
Table of Contents
