ATEN RCMDVI00BT User Manual page 114

RCM KVM over IP Transmitter User Manual
Item
IP Range
DHCP
Use Original IP Setting
6. Use the Naming Rule radio button to create a naming convention (Title +
Number); or Use Original Name to use the name currently configured on
the transmitter / receiver, then click Next.
7. Confirm each Transmitter's Name, IP Address, Audio setting and check
the boxes to set Permissions*, then click Next and repeat the process for
Receivers.
98
Select the IP Range radio button to enter a series of
static IP addresses to assign to the transmitters/receivers
that you are adding.
Select the DHCP radio button for dynamic IP address
assignment.
Select this radio button to use the IP address currently
configured on the transmitter / receiver.
Description