RCM KVM over IP Transmitter User Manual
Note: If this method is used, the LDAP schema for MS Active Directory
must be extended. Without schema – Only the Usernames used on
the RCM/KE Manager are matched to the names on the LDAP / AD
server. User privileges are the same as the ones configured in the
RCM/KE Manager.
Without schema – Only the Usernames used on the RCM/KE Manager
are matched to the names on the LDAP server. User privileges are the
same as the ones configured in the RCM/KE Manager software.
Without schema – Only Groups in AD are matched. User privileges are
the ones configured for the groups he belongs to in the RCM/KE
Manager.
Without schema – Usernames and Groups in AD are matched. User
privileges are the ones configured for the User and the Groups in the
RCM/KE Manager.
TACACS+ Settings:
Enable TACACS+ and enter the following information:
Preferred TACACS+ Server
Preferred TACACS+ Service Port
Shared Secret 1
Alternate TACACS+ Server
Alternate TACACS+ Service Port
Shared Secret 2
166