Ccvsr; Working Mode - ATEN RCMDVI00BT User Manual

CCVSR

Important operations occur on the transmitter can be recorded using the
CCVSR program.
Check Enable to enable the CCVSR function and specify the MAC address
and the Service Port of the computer the CCVSR runs on.
Note: The valid port range is 1–65535. The port number must different than
the one used for the Program port (see Service Ports, page 69).

Working Mode

Use this section to set the working mode parameters.
 Enable ICMP: Check to enable ICMP service.
 Disable Browser Service: Check to disable a particular access. Available
options are: browser, http or https.
 Enable Client AP Device List: Check to enable this function. When
enabled, the unit will be discoverable in the Server List when using the
WinClient or Java Client AP (see Starting Up on page 191). Disabling this
function will render the unit undiscoverable in the Server List but can still
be connected to.
After entering the information, click Save.
Chapter 4. OSD Operation
71