®
R&S
NGL200/NGM200
3. Activate the "Fast Transient Response" from the menu.
The R&S NGL/NGM applies the fast transient response on the operating condition
and displays the "Fast Transient Response" icon on the selected channel status
bar information.
The setting of "Fast Transient Response" affects the output impedance control loop
behavior. See
6.2.3 Output
The "Output" menu provides the settings for
gers action
1. Press [Settings] key.
The R&S NGL/NGM displays the device/channel menu window.
2. Select the required channel tab to apply output delay.
The R&S NGL/NGM displays the selected channel menu.
3. Select the "Output" menu item.
The R&S NGL/NGM displays the "Output" dialog.
Figure 6-6: Output delay dialog
6.2.3.1
Impedance
The output impedance function is disabled during voltage ramp time of "Ramp" func-
tion. See
1. Select the "Impedance" menu item to configure the required values.
The R&S NGL/NGM displays the "Output Impedance" dialog.
User Manual 1178.8736.02 ─ 06
Chapter 6.2.3.1,
on the output mode.
Chapter 6.7.2,
"Ramp",
Activating the Channels Output
"Impedance",
on page 44.
output
impedance,
on page 65.
Instrument Functions
output delay
and
trig-
44