R&S NGM202 User Manual page 72

®
R&S NGL200/NGM200
4. Select the "Save Location" menu item to select the predefined target folder for data
logger.
●
●
Figure 6-28: Target folder dialog
5. Set the required "Target Folder".
6. Select "Mode" to set logging duration.
●
●
●
●
7. Depending on the selected mode, configure the required settings for the data log-
ging duration.
8. Activate the "Enabled" menu item.
User Manual 1178.8736.02 ─ 06
"Auto": "Target Folder" is auto-selected.
If no USB stick is detected, "Target Folder" is set to internal memory ("int") par-
tition. By default, "USB1A" partition is selected.
"Manual": Choice of "Target Folder".
Selection is possible only if USB stick is detected.
"Duration": Time taken for data logging with duration and time interval setting.
"Span": Time taken for data logging with start time, time interval and duration
setting
"Unlimited": Data logging with time interval setting. The data logging continuous
until function is deactivated.
"Count": Data logging with number of counts and time interval setting
Instrument Functions
Data Logging
69