Flog:wfile:duration; Flog:wfile:tpartition; Flog[:State]; Flog:srate - R&S NGM202 User Manual

®
R&S NGL200/NGM200
FLOG:WFILe:DURation <duration>
Sets or queries the file writes duration.
Setting parameters:
<duration>
Example:
FLOG:WFILe:TPARtition <arg0>
Selects the external partition to which the data is written into.
Parameters:
<arg0>
Example:
FLOG[:STATe] <arg0>
Sets or queries the FastLog state.
Parameters:
<arg0>
Example:
FLOG:SRATe <samplerate>
Sets or queries the sample rate of the FastLog function.
Parameters:
<samplerate>
Example:

HCOPy:DATA?

Returns the actual display content (screenshot). The DATA? query responses the
screenshot data in binary format.
Usage:
User Manual 1178.8736.02 ─ 06
Sets file writes duration.
FLOG:WFIL:DUR 2
Sets file writes duration for Ch1 to 2 seconds.
Defines the external path partition to which the data is written in
the USB stick.
FLOG:WFIL:TPAR "/USB1A/NGM202"
1 | 0
1
Enables the FastLog state.
0
Disables the FastLog state.
FLOG 1
Activates the Ch1 FastLog state.
S500K | S250K | S125K | S62K5 | S31K25 | S15K625 |
S7K812 | S3K906 | S1K953 | S976 | S488 | S244 | S122 | S61 |
S30 | S15
FLOG:SRAT S500K
Set Ch1 FastLog writes sample rate at 500K samples/sec.
Query only
Remote Control Commands
Data and File Management Commands
148