R&S NGM202 User Manual page 158

®
R&S NGL200/NGM200
Return values:
<Condition>
Usage:
STATus:QUEStionable:INSTrument:ENABle <arg0>
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:ENABle <Enable_Value>
Sets or queries the enable mask that allows true conditions in the EVENt part to be
reported in the summary bit.
If a bit in the ENABle part is 1, and the corresponding EVENt bit is true, a positive tran-
sition occurs in the summary bit. This transition is reported to the next higher level.
Suffix:
<Channel>
Parameters:
<Enable_Value>
Example:
STATus:QUEStionable:INSTrument[:EVENt]?
STATus:QUEStionable:INSTrument:ISUMmary<Channel>[:EVENt]?
Returns the contents of the EVENt part of the status register to check whether an
event has occurred since the last reading. Reading an EVENt register deletes its con-
tents.
Suffix:
<Channel>
Return values:
<Event>
Usage:
STATus:QUEStionable:INSTrument:NTRansition <arg0>
STATus:QUEStionable:INSTrument:ISUMmary<Channel>:NTRansition
Sets or queries the negative transition filter. Setting a bit in the negative transition filter
shall cause a 1 to 0 transition in the corresponding bit of the associated condition regis-
ter to cause a 1 to be written in the associated bit of the corresponding event register.
Suffix:
<Channel>
User Manual 1178.8736.02 ─ 06
Condition bits in decimal representation
Range:
Query only
.
1..n
Bit mask in decimal representation
Range:
STATus:QUEStionable:INSTrument:ISUMmary1:
ENABle?
Queries the event register for the Standard QUEStionable Reg-
ister group.
.
1..n
Event bits in decimal representation
Range:
Query only
<NegativeTransition>
.
1..n
Remote Control Commands
Status Reporting Commands
0 to 65535
0 to 65535
0 to 65535
155