®
R&S
NGL200/NGM200
Positioning of instrument
The instrument must be positioned in a manner that allows you to disconnect the unit
from the mains at any time and without restrictions.
4.1.4.2
Rack Mounting
The instrument can be installed in a 19" rack using the rack adapter R&S HZN96 (P/N
3638.7813.02). Proceed according to the installation instructions supplied with the rack
adapter.
Ambient temperature
Place the R&S NGL/NGM power supply in an area where the ambient temperature is
within +5 °C to +40 °C. The R&S NGL/NGM power supply is fan-cooled and must be
installed with sufficient space along the sides to ensure free flow of air.
4.2 Instrument Tour
This chapter provides an overview of all the controls available in the R&S NGL/NGM
models and steps to switch on the instrument for the first time.
●
Overview of
●
Switching On the
4.2.1 Overview of Controls
4.2.1.1
Front Panel
The front panel of the R&S NGL/NGM is as shown in
navigation controls are located beside the display. The various connectors are located
at the right side of the display.
The R&S NGL/NGM has one output channel for NGL201, NGM201 models and two
output channels for NGL202, NGM202 models.
User Manual 1178.8736.02 ─ 06
Controls...............................................................................................18
Instrument................................................................................... 22
Getting Started
Instrument Tour
Figure
4-2. The function keys and
18