R&S NGM202 User Manual page 156

®
R&S NGL200/NGM200
Suffix:
<Channel>
Return values:
<Condition>
Usage:
STATus:OPERation:INSTrument:ENABle <arg0>
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle <arg0>
Controls or queries the ENABle part of the STATus:OPERation register. The ENABle
defines which events in the EVENt part of the status register are forwarded to the
OPERation summary bit (bit 7) of the status byte. The status byte can be used to cre-
ate a service request.
Suffix:
<Channel>
Parameters:
<Enable>
Example:
STATus:OPERation:INSTrument[:EVENt]?
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?
Returns the contents of the EVENt part of the status register to check whether an
event has occurred since the last reading. Reading an EVENt register deletes its con-
tents.
Suffix:
<Channel>
Return values:
<Event>
Usage:
STATus:OPERation:INSTrument:NTRansition <NegativePosition>
STATus:OPERation:INSTrument:ISUMmary<Channel>:NTRansition <arg0>
Sets or queries the negative transition filter. Setting a bit in the negative transition filter
shall cause a 1 to 0 transition in the corresponding bit of the associated condition regis-
ter to cause a 1 to be written in the associated bit of the corresponding event register.
Suffix:
<Channel>
User Manual 1178.8736.02 ─ 06
.
1..n
Condition bits in decimal representation.
Range: 1 to 65535
Query only
.
1..n
Range: 1 to 65535
Increment: 1
STATus:OPERation:INSTrument:ISUMmary1:ENABle?
Reads the enable register for the Standard Operation Register
group
.
1..n
Range: 1 to 65535
Query only
.
1..n
Remote Control Commands
Status Reporting Commands
153