R&S NGM202 User Manual page 67

®
R&S NGL200/NGM200
Figure 6-23: Arbitrary editor dialog
1. Configure the "Arb Editor" with the required voltage, current and duration.
The R&S NGL/NGM displays the on-screen keypad for data entry.
2. Confirm values with the unit keys.
3. Select the interpolation checkbox to toggle on/off the interpolation function on the
arbitrary data.
4. Select the "Plus" or "Minus" icon to add or delete the arbitrary data from the dialog.
●
●
5. Set the "Rep" to configure repetition cycle for the arbitrary data.
By default, the repetition cycle is set to infinity.
6. Set the "End Behavior" to handle the way to end the automation of the arbitrary
function.
●
●
7. Select
The R&S NGL/NGM displays a popup message to show that file saved success-
fully.
User Manual 1178.8736.02 ─ 06
"+": A new row of arbitrary data is added to the end of the table. The new addi-
tion is a copy of the last arbitrary data in the table.
"-": To delete, select the row of arbitrary data for deletion follows by the "Minus"
icon.
"Off": The output of the selected channel is turned off after performing the arbi-
trary function.
"Hold": The last voltage and current values remains at the output terminal of
the instrument.
(new file) or (existing file) to save the arbitrary data.
Instrument Functions
Advanced Features
64