Input Data - R&S NGM202 User Manual

®
R&S NGL200/NGM200
1 = Minimum, maximum and average value for power, voltage and current
2 = Calculation of energy result
3 = Number of samples collected
4 = Channel display area of selected channel
5 = Digital I/O trigger of selected channel

5.2.3 Input Data

The R&S NGL/NGM provides an on-screen keypad for you to enter numerical values.
Use the back key
entries.
1. Select a menu item to enter the numeric value.
The R&S NGL/NGM displays the on-screen keypad.
2. Enter the required value.
3. Confirm value with the unit key.
Alternatively, select the enter key
Figure 5-7: Enter numerical value and unit
For alphanumeric input, the on-screen keypad works the same way.
1. Select the "Caps Lock"
The "Caps Lock" key is highlighted in blue.
2. Select "&123" or "ABC" key to switch between alphabet and numeric input data.
User Manual 1178.8736.02 ─ 06
on the on-screen keypad to cancel input of the numerical
to confirm your value.
key to switch between capital letters and small letters.
Operating Basics
Using the Touchscreen
33