R&S NGM202 User Manual page 55

®
R&S NGL200/NGM200
Figure 6-12: Battery simulator dialog
4. Activates the "Enabled" menu item.
The R&S NGM enables the battery simulation function.
5. Select the "Load frrom file..." to load the battery model file.
The R&S NGM opens a dialog to select the source and file location.
6. Selects the required source and file location.
Alternatively, select "New file" to edit a new battery model file. The R&S NGM
opens the
7. Select the "Load from file..." to load the selected file.
The R&S NGM loads the selected battery model file into the
dialog.
Battery model editor
The battery model editor dialog allows you to edit the "State of Charge (SoC)", "Open-
Circuit Voltage (Voc)" and "Internal Resistance (ESR)" for a new or exisiting battery
model file. To view or open the list of available battery model files, select
battery model file.
User Manual 1178.8736.02 ─ 06
battery model edior dialog
Instrument Functions
to edit the new battery model file.
Battery Simulator
battery model edior
to open the
52