Battery:simulator[:Enable]; Battery:status; Battery:model:capacity; Battery:model:clear - R&S NGM202 User Manual

®
R&S NGL200/NGM200
Example:
Usage:
BATTery:SIMulator[:ENABle] <arg0>
Enables, disables or queries the specific channel of the battery simulator state.
Parameters:
<arg0>
Example:

BATTery:STATus?

Queries the status of the battery (idle, charging or discharging).
Example:
Usage:
BATTery:MODel:CAPacity <arg0>
Sets or queries the battery model capacity.
Parameters:
<arg0>
Example:

BATTery:MODel:CLEar

Clears the current battery model.
Example:
Usage:
BATTery:MODel:DATA {<arg0>, <arg1>, <arg2>}...
Sets or queries the battery model data.
User Manual 1178.8736.02 ─ 06
INST:NSEL 1
BATT:SIM:VOC:FULL?
Returns 1 if channel 1 battery simulator is fully charge.
Query only
1 | 0
INST:NSEL 1
BATT:SIM 1
Enables the battery simulator state for channel 1.
INST:NSEL 1
BATT:STAT?
Returns the status of the battery state from channel 1.
Query only
Sets the battery model capacity.
INST:NSEL 1
BATT:MODel:CAP 50
Sets battery model capacity as 50 % for channel 1.
INST:NSEL 1
BATT:MOD:CLE
Clear the current battery model for channel 1.
Event
Remote Control Commands
Advanced Operating Commands
141